Motorola APX 7500, Подробное руководство по обслуживанию

Страница: 70 / 164

September 9, 2011 68009482001
3-28 Installation: Programming the Consolette
3.7.3.5.6 Numeric Keypad and Programmable Buttons (Available with Option L999_)
The numeric keypad and 3 buttons to the right of the numeric keypad on the front panel represent
buttons available on the Keypad Microphone. The numeric keypad is used for list entry fields in
conjunction with the O5 display. The 3 buttons are essentially the 3 programmable side buttons on
the Keypad Microphone.
The numeric keypad is always enabled; no additional setup is required.
From the Button & Softmenu Assignment page ( Figure 3-12 ) and the “Fixed Function Button
Configuration” fields, the function buttons labeled P1, P2, and P3 can be configured for “KPM
purple”, “KPM one-spot”, and “KPM two-spot” consecutively. APX 7500 CPS can then be used to
assign any available radio function to these 3 programmable buttons such as Monitor, Emergency,
Secure, Scan, VIP Out control (ex. Aux Control).
Additionally, from the Button & Softmenu Assignment page ( Figure 3-12 ), the buttons labeled P1, P2,
and P3 can be configured for one-touch Consolette features that normally would be assigned to a
soft menu underneath the auxiliary display such as “Crosspatch”. Note that there will be no virtual/
soft function button and label on the auxiliary display to indicate the functionality of these buttons.
Once selections have been made, select “Store” at the bottom of the page to apply the changes to
the Consolette.