Motorola APX 7500, Подробное руководство по обслуживанию

Страница: 69 / 164

68009482001 September 9, 2011
Installation: Programming the Consolette 3-27
3.7.3.5 Front Panel Setup
3.7.3.5.1 Front Panel Microphone Setup (Available with Option L999_)
The Consolette ships factory defaulted for use with a paddle mic connected to the O5 Control Head.
If the Consolette is intended to be used without a microphone connected to the O5 Control Head,
then the Default Control Head HUB State must be configured as On Hook in the APX mobile CPS.
In APX Mobile CPS:
Radio Ergonomics Configuration
Æ
Radio Ergonomics Wide
Æ
Advanced Tab:
• Default Control Head HUB State – Select "On Hook"
NOTE: This field is ignored if a microphone is connected to the control head CGAI connector. The
Consolette will follow the HUB state of the microphone.
3.7.3.5.2 Speaker Mute Setup (Available with Option L999_)
There is a dedicated button on the front panel of the Consolette for muting the local speaker. From
the Audio Parameters page (
Figure 3-9 ), this button can be configured for momentary operation or
latching operation. For momentary operation, select a duration in the pull-down menu for the “Timed
Mute Duration” field. For latching operation, select “Infinite” in the pull-down menu for the “Timed
Mute Duration” field.
The associating mute LED on the front panel can be enabled or disabled here too if necessary by
selecting either “Enabled” or “Disabled” for the “Mute Button LED” setting.
3.7.3.5.3 Clock Setup
The Consolette will display the time on the auxiliary display. From the Consolette Parameters page
(
Figure 3-8 ), the Clock can be configured via the “Clock Configuration” field for 24 hour mode, 12
hour mode or disabled. When enabled, the Clock’s time can be set using the “Setup” soft menu on
the auxiliary display.
Additionally, the Consolette can be set up to read the time from the Network Time (NTP) server by
enabling the “Network Time (NTP) Query” field.
The Consolette ships from the factory with a coin cell battery installed for the purpose of maintaining
the time in the event of a loss of AC power. Refer to
section 4.7 for maintenance information
regarding this coin cell battery.
3.7.3.5.4 VU Meter Setup
The Consolette supports a VU Meter bar graph on the auxiliary display. The VU Meter can be
enabled or disabled by the “VU Meter” field from the Consolette Parameters page (
Figure 3-8 ).
3.7.3.5.5 Soft Menu Setup
There are 3 buttons underneath the auxiliary display on the front panel. Up to 8 soft menus can be
assigned and accessed using these 3 buttons. From the Softmenus Assignment page (
Figure 3-12 ),
features can be added to the soft menus as well as custom text for the labels. Up to 4 printable US-
ASCII characters can be assigned.
For example, the user can add the “Crosspatch” function onto a soft menu with the text “XPAT”. The
user will then see “XPAT” on the auxiliary display and be able to toggle the Crosspatch feature of the
Consolette to either Enabled or Disabled from the front of the Consolette.
Once selections have been made, select “Store” at the bottom of the page to apply the changes to
the Consolette.