Motorola solutions IMPRES 2 NNTN8895, Руководство пользователя

Страница: 60 / 168

60
Englis
h
Table 24: Troubleshooting Long_Term Storage Charge
Problem What to do...
Flashing Red LED and
Display (if available) is:
WRONG BATT TYPE
CANNOT LT STORE
or
Flashing Red LED and
Display (if available) is:
CANNOT DISCHARGE
CANNOT LT STORE
Remove the battery from the pocket. Verify that the
battery IS NOT attached to a radio.
Verify that the battery is an IMPRES 2 or IMPRES
battery. Other batteries will be faulted.
Clean the IMPRES 2 or IMPRES battery electrical
contacts using a dry cloth.
Remove power from the charger, then clean the pocket
electrical contacts using a dry cloth.
Try replacing the battery with another IMPRES 2 or
IMPRES battery. If the fault no longer exists, then take
the faulted IMPRES 2 or IMPRES battery out of
service.
If the fault persists with the replacement IMPRES 2 or
IMPRES battery, take the charger out of service.
Flashing Red LED and
Display (if available) is:
STORE INCOMPLETE
Low Capacity : yy%
The Potential Capacity of the IMPRES 2 or IMPRES
battery may be less than the Long-Term Storage
selection. The battery may be nearing End of Life.
Flashing Red LED and
Display (if available) is:
RADIO POCKET
CANNOT LT STORE
or
Flashing Red LED and
Display (if available) is:
CHARGING POCKET
CANNOT LT STORE
The charger pocket is not the standard pocket for
charging a battery (e.g., through electrical contacts
between the charger and the battery).
• A Radio Pocket is a special pocket in which the
battery is attached to a radio, there are no external
contacts on the battery, and the battery is charged
through electrical contacts on the radio.
• A Charging Pocket is a pocket that uses charger
energy for a special purpose, such as USB charging
ports.
Move the battery to a standard pocket or replace the
Radio Pocket or Charging Pocket with a standard
pocket.
MN004592A01.book Page 60 Thursday, December 19, 2019 9:55 AM