Motorline professional MHACA12PMBE, Руководство пользователя и инсталлятора

Страница: 15 / 19

14A 14B
EN EN
FUNCTIONS CODE OPERATIONS VALUE
Enable alarm button tampering
0 Disabled 0
128 Activated +128
06. STANDALONE PROGRAMMING 06. STANDALONE PROGRAMMING
CARD CHECK
Control Code 20. Defines different types of advanced settings. Please refer to the table for the Advanced
Settings list.
Example: Enabled door alarm and controller. Enter 3 to perform the mentioned functions.
Example: Alarm button against activated violations. Enter 128 to perform the mentioned functions.
FUNCTIONS CODE OPERATIONS VALUE
Sound Signals Controller
0
Controller without sound signals in
the door sensor.
0
1
Controller with sound signals in the
door sensor.
+1
Door alarm
0 Alarm disabled on the door sensor. 0
2 Alarm activated in the door sensor. +2
OPERATIONS INSTRUCTIONS
01 • Enter programming mode
Master code
*
#
(The default master code is 30191000)
02 • Enter control code 20
20 #
03 • Enter the value (3)
Value
#
04 • Exit programming mode
#
Control Code 22 . Allows you to activate a second card check. This function restricts a card from being
passed twice in a specified time.
ADVANCED FUNCTIONS
OPERATIONS INSTRUCTIONS
01 • Enter programming mode
Master code
*
#
(The default master code is 30191000)
02 • Enter control code 21
21 #
03 • Enter the value (128)
Value
#
04 • Exit programming mode
#
EXIT BUTTON AND DOOR SENSOR
Example: Output button as NO and door sensor as in 2 + 8 = 10. Enter 10 to perform the mentioned
functions.
Control code 23. Sets the NO/NC settings for the output button and the door sensor. Please refer to the
table below for the list of settings.
OPERATIONS INSTRUCTIONS
01 • Enter programming mode
Master code
*
#
(The default master code is 30191000)
02 • Enter control code 22
22 #
03 • Enter time
1 to 255 seconds
04 • Exit programming mode
#
FUNCTIONS CODE OPERATIONS VALUE
Output Button NO/NC
0 Disabled 0
1 NC Output Button +1
2 NO Output Button +2
Door sensor NO/NC
0 Disabled 0
1 NC Sensor door +4
2 NO Sensor door +8
OPERATIONS INSTRUCTIONS
01 • Enter programming mode
Master code
*
#
(The default master code is 30191000)
02 • Enter control code 23
23 #
03 • Enter the value
Value
#
04 • Exit programming mode
#
Control Code 21. Defines different types of advanced settings. Please refer to the table for the Advanced
Settings list. This setting replaces the normal door pushbutton operation for intrusion alarm pushbutton.
This setting replaces the normal door pushbutton operation for intrusion alarm pushbutton.
ALARM BUTTON AGAINST VIOLATIONS