9A
9B
9A
9B
CMD
SET
SEL
5s
CMD
SET
SEL
CMD
SET
SEL
CMD
SET
SEL
CMD
SET
SEL
5s
CMD
SET
SEL
CMD
SET
SEL
CMD
SET
SEL
EN
EN
EN
EN
With the “Follow Me” function activated, whenever the photocells detect the passage of a
user/obstacle, the control board triggers the closing maneuver 3 seconds later.
0 - Disable | 1 - Enable
1 •
Press the
SEL
and
SET
buttons simultaneously
for 5 sec. to access the
programming menu.
4 •
The display will show the
value 0 or 1, which identifies
the option in which the
control board is currently
configured. Use the SEL
button to put on the desired
option. Press
SET
to save the
option.
2 •
The display will show
F
.
Press the
SEL
button as
many times as necessary
until the display shows
b
.
5 •
The display will show
b
and the configuration was
successful.
3 •
Press the
SET
button to
access the submenu.
6 •
To exit the programming
mode wait 10 sec. until (–)
appears.
ENABLE/DISABLE FOLLOW ME
05. FUNCTIONS
The deceleration reduce the motor speed in the final part of the course (opening or closing).
Without deceleration - select the value 0
Minimum deceleration – 1 second
Maximum deceleration – 9 seconds
1 •
Press the
SEL
and
SET
buttons simultaneously
for 5 sec. to access the
programming menu.
4 •
The display will show the
value 0 or 4. Use the
SEL
button to put on the desired
option. Press the
SET
button
once to save this option.
2 •
The display will show
F
.
Press the
SEL
button as
many times as necessary
until the display shows
H
.
5 •
The display will show
H
and the configuration was
successful.
3 •
Press the
SET
button to
access the submenu.
6 •
To exit the programming
mode wait 10 sec. until (–)
appears.
INCREASE OR DECREASE DECELERATION
05. FUNCTIONS
