© Motor City Wash Works, Inc. 48285 Frank, Wixom Michigan 48393 U.S.A.
Phone: 248.313.0272 ▪ Fax: 248. 313.0271
8MANULTOPWHL0001 12-9-20
www.motorcitywashworks.com
10
Pic #16: Passenger’s Side Hub Assembly
Tighten
all the clamp fasteners evenly starting from the middle toward the ends.
Pic #16: Passenger Side Hub Assembly
Remove
the compression plates at the end of the hub and slide a
20” STAR FOAM BUN ONTO THE HUB
(see picture #18). Follow with four
10” STAR FOAM BUNS
and complete with the last
20” BUN.
F
inish by
adding as many 12" foam spacers necessary
to get at least 2-1/2" of compression.
Reinstall the two
compression plates (see Picture #19).
Pic #17: Driver’s Side Compression Plates
TIGHTEN
STOP!
IT IS IMPORTANT THAT THE FASTENERS ARE
TIGHTENED EVENLY. FAILURE TO DO SO MAY CAUSE THE TOP
WHEEL BRUSH TO WOBBLE WHEN RUNNING AND MAY LEAD
TO PREMATURE WEAR OF YOUR TOP WHEEL.