headline bars
tabs
continuation tabs
notes
headline bars
tabs
continuation tabs
notes
headline bars
tabs
continuation tabs
notes
tabs
co
ntinu
ation tabs
no
tes
w
ar
nings
6
GETTING S
TA
RTED
GETTING STARTED
When a motorized appliance or a tool turns on, there is an initial surge of power to start. This surge of
power is referred to as the "starting load" or "peak load." Once started, the tool or appliance requires less
power to operate. This is referred to as the "continuous load" in terms of power requirements. You will need
to determine how much power your tool or appliance requires to start up (starting load) and its continued
running power requirements (continuous load).
Power consumption is rated in watts, or it can be calculated from amperes (amps). This information is
usually stamped or printed on most appliances and equipment. If this information is not indicated on the
appliance or equipment, check the owner's manual. For electrically sensitive equipment, contact the
manufacturer to determine if the device you are using is compatible with modified sine wave AC.
Multiply:
AC AMPS
X
110
(AC voltage) =
WATTS
This formula yields a close approximation of the continuous load of your appliance.
Multiply:
WATTS
X
2
= starting load for most appliances
This formula yields a close approximation of the starting load of most appliances. Exceptions are motorized
appliances such as pumps, freezers and air conditioners. These appliances can have startup loads of up to
eight times the rated watts.
model no. 011-2102-0 | contact us 1-888-942-6686
