headline bars
tabs
con
tinua
tion tabs
not
es
w
ar
nings
17
headline bars
tabs
con
tinuation tabs
notes
war
nings
TROUBLESHOO
TING
headline bars
tabs
continuation tabs
notes
warnings
NOTE:
For more information about troubleshooting or replacement parts, call toll-free: 1-888-942-6686.
PROBLEM
POSSIBLE CAUSE
SOLUTION
Red LED is flashing. • Ring terminals are
connected in reverse.
• Desulfation failed.
• Maintain current is too
high. (May be caused
by battery problem, or
the battery is charging
and discharging at the
same time.)
• Reverse the connection
of the ring terminals.
• Have the battery
checked.
• Do not charge and
discharge battery at
the same time. Have
battery checked.
Battery ring
terminals do
not spark when
touched together.
The charger is equipped
with an auto-start feature.
It will not supply current to
the battery ring terminals
until a battery is properly
connected. The ring
terminals will not spark if
touched together.
No problem; this is a
normal condition.
Both LEDs come
on for 2 seconds,
then turn off.
The charger is plugged
into an AC outlet.
No problem; this is
normal.
I cannot select a
6 V or 12 V setting.
The charger is equipped
with Auto Voltage Detection,
which automatically
detects the voltage and
charges the battery.
No problem; this is
normal.
