Motomaster 009-5206-4, Инструкция по эксплуатации

Страница: 6 / 16

5
Return all accessories to their designated compartments.
Ensure all tires have valve stem caps (if applicable).
Securely wrap the air hose counter-clockwise around the base and return the valve
chuck to its recess.
Carefully bundle the 12 V power cord, return it to the storage compartment and close
compartment door.
Wrap the 120 V power cord around the base in a clockwise direction.
Wipe clean with a damp cloth to help maintain the inflator’s appearance.
Move the AC/OFF/DC selector to either ‘[ ]’ or ‘[ ]’.
Adjust to your desired pressure (refer to “Programmable pre-set digital control”).
Select the appropriate adaptor and open the valve chuck by extending the lever. Then
firmly insert the adaptor into the open end of the chuck.
Close the lever on the valve chuck to secure the adaptor.
Insert the adaptor onto the valve of object to be inflated.
Press the Start/Stop button on the control panel ‘ ’ and the inflator will begin to
inflate.
When the object’s pressure reaches the pre-set pressure, the inflator will stop
automatically. Also, the inflator can be stopped manually while inflating by pressing the
Start/Stop button again.
Remove the quick-connect valve chuck from the object and disconnect the power
source. See below for storage directions.
Inflating sports equipment and/or small inflatables
IMPORTANT
This inflator includes a flashing red hazard light for emergency roadside use.
Press the Hazard light button to activate. Press again to deactivate.
STORAGE
1
2
3
4
5
6
7
8
1
2
3
4
5
6
INFLATING SPORTS EQUIPMENT