Motomaster 009-5206-4, Инструкция по эксплуатации

Страница: 4 / 16

9
8
12
11
10
Never expose the inflator to rain, frost, temperatures above 30°C (86°F) or
temperatures below -30°C (-22°F).
This inflator is suitable for use with the 12 V DC power outlet in your vehicle or 120 V AC
power in your home.
For best results, it is recommended to have your vehicle running while using the inflator.
Make sure the inflator, cords and hoses are not exposed to hot objects,
oil or sharp edges.
For your own safety, you should only use accessories and parts
included with this inflator.
Do not use this inflator with vehicle power outlets other than
those rated for 12 V.
3
This product is equipped with a programmable pre-set digital control and automatic
inflator shut-off. The digital control with gauge can be used to monitor air pressure when
inflating your desired objects, and will automatically shut off once pre-set desired pressure
is reached.
OPERATION
Begin by plugging in the inflator to the desired power source and selecting the appropriate
source using the AC/OFF/DC selector on the top panel. The current pre-set pressure setting
is shown on the left side of the LCD screen below the set gauge icon.
Setting a pre-set pressure
The pre-set pressure setting can be adjusted by pressing the Increase or Decrease
pre-set PSI level buttons ‘+/-’. Press button ‘+’ to increase the pre-set pressure or
press button ‘-’ to decrease the pre-set pressure. Once the desired setting is
reached, stop pressing the pre-set buttons.
1
IMPORTANT
Prior to starting the inflator, always verify the current pre-set pressure setting to
prevent overinflation or underinflation.
The pre-set pressure is factory set at 0 PSI. When the pre-set pressure is at 0 PSI, the
inflator will not shut off automatically. While inflating, please monitor the current pressure
and stop the inflator manually using the start/stop button once the required pressure is
reached.
Programmable pre-set digital control
OPER
ATION