Page 23
M3 PRO - Setting the Security Pin Code
Setting the Security Pin Code
The M3 PRO also comes with the option of enabling a security feature to make the trolley unusable for
potential thieves. There is no pin-code set when the trolley is manufactured but this can be set using
the steps below:
1. Press and hold the left button whilst connecting the battery to the trolley, release the button once
the screen has illuminated
2. Use the ’On/Off’ button to choose the first number of your pin code (0-9) (fig. 1). Turn clockwise to
increase the number or anti-clockwise to decrease
3. Press the right button to confirm your choice
4. Repeat step 2 and 3 for each of the four digits
5. Once the fourth number has been confirmed, the lime chevrons will illuminate to indicate a valid
pin code has been entered (fig. 2)
6. Unplug the battery and leave for a few seconds
When you next connect your battery, the trolley will ask you to enter the pin code that has been set.
This can be done using the on/off button to select the number and the right button to confirm.
IMPORTANT : Before pressing the right button for the fourth time, please check that the desired pin
code is correct. You may wish to keep a record of this number. If you are unable to enter the correct
pin code the trolley will need to be returned to Motocaddy to be reset (this will incur a charge).
Fig 2
Fig 1
