Motocaddy M1 Lite Скачать руководство пользователя страница 18 | Manualshive

Страница: 18 / 32

Motocaddy M1 Lite Скачать руководство пользователя страница 18

Page 18

M3 PRO - Starting, Stopping & Changing Speed / Using the USB Charging Port

Starting, Stopping and Changing the Speed of your Trolley

The speed can be adjusted while the trolley is stationary or in motion. Rotate the central button clockwise to increase the
speed setting and anti-clockwise to decrease. You will see the number in the centre of the screen changing accordingly.
The settings range from 1 (slowest) to 9 (fastest). To start the trolley, simply press the button. To stop it, press the button again
- there is no need to decrease the speed before stopping as it is designed to smoothly accelerate back to the required speed.
You will notice the lime chevrons will start flashing when you press the button, this indicates that the trolley has been started.

Using the USB Charging Port

The M3 PRO features a USB charging port designed to charge GPS devices during your round, should your device require a top up.

Simply remove the covering cap and plug a USB cable into the charging port located on the underside of the handle.
The device will continue charging for the duration of time that the cable is attached and the battery is connected.

It is important to note that the rate of charge will be lower than that of a mains AC charger and similar to plugging the device
into a PC. The USB charger takes power from the main trolley battery and continuous charging will reduce the battery capacity
between charges. The trolley is designed to disable the USB port when the battery capacity reaches a preset level.

«
...
16
17
18
19
20
...
»

Содержание M1 Lite

































Отзывы:

Нет отзывов