Page 15
Using your M1
The M1 is very simple to control. There is one main button that is
used to start and stop the trolley, whilst also controlling the speed,
which can be adjusted while the trolley is stationary or in motion.
The trolley has 9 speed settings (1 to 9) with 1 being the slowest
and 9 the fastest. To increase the speed, rotate the speed dial
clockwise, or anti-clockwise to decrease the speed.
To start the trolley, simply select your required speed setting
and press the button. The trolley will smoothly accelerate until it
reaches the selected speed. To stop the trolley, simply press the
button again - there is no need to reduce the speed setting.
You will notice the red chevrons will start flashing when you
press the button, this indicates that the trolley has been started.
The trolley is designed to protect your battery from being fully
discharged, should your battery capacity drop too low the trolley
will cut the power to the motor. If this should happen you will
see the battery meter flashing on screen.
NB : Please be aware that certain moisture, temperature and humidity conditions can result in localised misting within
the display screen. This will not affect the trolley functionality, nor cause any damage and will return to normal when
adverse conditions subside.
Using your M1 / Power and Battery Level
2
3
4
