MOTO GUZZI NEVADA 750, Руководство по обслуживанию станции

Страница: 43 / 128

Engine temperature sensor
Function
indicates the engine temperature to the control unit
so as to optimise carburetion and idle control
Operation / Operating principle
NTC type sensor (resistance sensor, inversely
variable with temperature).
Level in electrical circuit diagram: Temperature
sensors
Location:
•
on the right head, next to the throttle
body
•
connector: on the sensor
Electrical characteristics:
•
Resistance at 0°C: 9.75 k
Ω
± 5%
•
Resistance at 20°C: 3.747 k
Ω
± 5%
•
Resistance at 40°C: 1.598 k
Ω
± 5%
•
Resistance at 60°C: 0.746 k
Ω
± 5%
•
Resistance at 80°C: 0.377 k
Ω
± 5%
•
Resistance at 100°C: 0.204 k
Ω
± 5%
Pin-out:
•
Grey (cable harness side): Ground
connection
•
Orange (cable harness side): 0-5 V sig-
nal
NAVIGATOR: PARAMETERS
Engine temperature
In case of failure, the value read on Navigator (20°C - 68°F) is set by the control unit, so it is not a real
value.
NAVIGATOR: ELECTRICAL ERRORS
engine temperature sensor - open circuit, shorted to positive / shorted to negative.
Error cause
•
If the circuit is open, shorted to positive: excessive voltage has been detected at PIN 4 of
the control unit connector.
•
If shorted to negative: voltage equal to zero has been detected at PIN 4 of the control unit
connector
Troubleshooting
NEVADA 750
Electrical system
ELE SYS - 43