MOTO GUZZI NEVADA 750, Руководство по обслуживанию станции

Страница: 15 / 128

ELECTRIC STARTING SYSTEM
Name Torque in Nm
Starter motor fixing screws 25 Nm (18.43 lbf ft)
FUEL SUPPLY CONTROL UNIT
Name Torque in Nm
Injection cap fixing screws M5 4 Nm (2.95 lbf ft)
Screws fixing intake pipe to the heads 10 Nm (7.37 lbf ft)
OIL PUMP
Name Torque in Nm
Oil pressure sensor 8 - 10 Nm (5.90 - 7.37 lbf ft)
Oil pump to crankcase fixing screws 10 Nm (7.37 lbf ft)
Filtering cartridge sealing cover fixing screw 25 Nm (18.43 lbf ft)
GENERATOR
Name Torque in Nm
Generator stator fixing screws 5 Nm (3.68 lbf ft)
Generator rotor nut 80 Nm (59.00 lbf ft)
GEAR
Name Torque in Nm
Clutch shaft fixing nut 100 Nm (73.75 lbf ft)
Main shaft lock nuts 65 Nm (47.94 lbf ft)
Cover to gearbox fixing screws 10 Nm (7.37 lbf ft)
Gearbox to clutch bell cover fixing screws 10 Nm (7.37 lbf ft)
Index lever fixing nut 6 Nm (4.42 lbf ft)
CHASSIS
Name Torque in Nm
Tank to chassis support rubber rings retainer - M8x14 (2) 25 Nm (18.44 lbf ft)
Cradle front retainer - M10x30 (2+2) 50 Nm (36.88 lbf ft)
Engine / gearbox to chassis retainer - M10 (1+1) 50 Nm (36.88 lbf ft)
Gearbox to chassis retainer - M12x55 (2) 50 Nm (36.88 lbf ft)
Stand to cradles transverse retainer - M10x260 (1) 50 Nm (36.88 lbf ft)
Stand to cradles transverse retainer - M8 (1+1) 25 Nm (18.44 lbf ft)
Battery housing plate retainer - M8x16 (4) 25 Nm (18.44 lbf ft)
Left and right rider footrest support to chassis retainer - M8x20
(2+2)
25 Nm (18.44 lbf ft) - Loctite 243
Left and right passenger footrest support to chassis retainer -
M8x16 (2+2)
25 Nm (18.44 lbf ft) - Loctite 243
FOOTRESTS AND LEVERS
Name Torque in Nm
Footrest rubber retainer - M6x12 (8) 10 Nm (7.38 lbf ft)
Gear shift lever cable retainer (nut) - M6x1 (2) 10 Nm (7.38 lbf ft)
Gear transmission lever retainer - M6x20 (1) 10 Nm (7.37 lbf ft)
Preselector lever retainer - M6x20 (1) 10 Nm (7.38 lbf ft)
SIDE STAND
Name Torque in Nm
Side stand retainer bolt - M10x1.25 (1) 10 Nm (7.38 lbf ft)
Switch retainer - M5x16 (2) 6 Nm (4.42 lbf ft)
Pin lock nut - M10x1.25 (1) 30 Nm (22.13 lbf ft)
S
WINGARM
Name Torque in Nm
Swingarm on gearbox retainer - M20x1 (2) 0 Nm (0 lbf ft) - in support without preloading
NEVADA 750
Characteristics
CHAR - 15