MOTO GUZZI Engine V1100, Руководство по ремонту

Страница: 74 / 108

ENGINE
3 - 47
Engine V1100
Con-rod bearings thickness
Bearings for crank pin ø undersized by mm (in)
STANDARD BEARING
(PRODUCTION) mm (in)
0.254 (0.00999) 0.508 (0.01999) 0.762 (0.02999)
1.662 (0.06543) 1.789 (0.07043) 1.916 (0.07543)
From 1.535 (0.06043) to 1.544 (0.06079)
1.671 (0.06578) 0.798 (0.07079) 1.925 (0.07579)
Crank pin diameter (B): mm (in)
Standard ø
Undersized by mm (in)
0.254 (0.00999)
Undersized by mm (in)
0.508 (0.01999)
Undersized by mm (in)
0.672 (0.02645)
44.008 - 44.020 mm
(1.73259 - 1.73307 in).
43.754 - 43.766 mm
(1.72259 - 1.72307 in).
43.500 - 43.512 mm
(1.71259 - 1.71307 in).
43.264 - 43.258 mm
(1.70330 - 1.70307 in).
Gudgeon pin-to-bushing coupling
Inner Ø of the bushing fitted and
machined mm (in)
gudgeon pin Ø mm (in)
Gudgeon pin-to-bushing clearance
mm (in)
22.007 (0.86641)
22.020 (0.86692) 21.994 (0.86590)
21.998 (0.86606)
0.009-0.026 (0.000354-0.001024)
Connecting rod weight table
Con-rod total weight
g (lb)
Weight of small end side
(rotating)
g (lb)
Weight of big end side
(rotating)
g (lb)
Color of weight selection
class
642 ± 2.5 (1.4153 ± 0.0055) 476 ± 3.5 (1.0494 ± 0.0077) White
647 ± 2.5 (1.4263 ± 0.0055
479.5 ± 3.5 (1.0571 ±
0.0077)
Light blue
652 ± 2.5 (1.4374 ± 0.0055)
165 ± 1 (0.3638 ± 0.0022)
483 ± 3.5 (1.0648 ± 0.0077) Orange
Crank pin diameter on flywheel side (C)
UNDERSIZED BY mm (in)
STANDARD PRODUCTION mm (in)
0.2 (0.0078) 0.4 (0.0157) 0.6 (0.0236)
53.770 (2.11692) 53.570 (2.10905) 53.370 (2.10118)
52.970 (2.08542)
53.951 (2.12405)
53.751 (2.11617) 53.551 (2.10830) 53.351 (2.10042)
Journal diameter on timing side (A)
UNDERSIZED BY mm (in)
STANDARD PRODUCTION mm (in)
0.2 (0.0078) 0.4 (0.0157) 0.6 (0.0236)
37.775 (1.48720) 37.575 (1.47932) 37.375 (1.47145)
37.975 (1.49507)
37.959 (1.49444)
37.759 (1.48657) 37.559 (1.47869) 37.359 (1.47082)
CRANKSHAFT
Inspect the journal surfaces; grind them if they are scratched
or oval (refer to undersize tables) and change the complete
flanges with main bearings.
Undersize values are: 0.2-0.4-0.6 mm (0.0078 – 0.0157 -
0.0236 in)
Assembly clearance values are:
•
Between bearing and journal on timing side 0.028 -
0.060 mm (0.00110 - 0.00236 in);
• Between bearing and journal on flywheel side 0.040 -
0.075 mm (0.00157 - 0.00295 in);
• Between bearing and crank pin 0.022 - 0.064 mm
(0.00087 - 0.00252 in);