4. Record Track
(continued)
Heart Rate:
Track your heart rate from MotionX using a ANT+ or Bluetooth Low Energy (BLE) chest
strap heart rate sensor.
ANT+
To setup an ANT+ heart rate monitor, wear the chest strap and connect the ANT+ receiver (dongle or
case) to your iPhone. Select Manage Sensor>Connect. Once connected, your heart rate will display on
the setup page and in the track recorder.
Bluetooth Low Energy (BLE)
Newer Bluetooth Low Energy heart rate monitors are supported on the iPhone 4S and iPhone 5 only as
BLE requires a specific Bluetooth chipset found only in these devices. No receiver dongle or case is
required and there is no need to pair the BLE HR monitor with your iPhone first. To set up, be sure
Bluetooth is turned on from iPhone Settings>General. Wear the chest strap, then from MotionX-GPS
select Menu>Setup>Heart Rate Sensor>Manage Sensor>Connect.
Manufacturers of Compatible Heart Rate Chest Straps
•
Wahoo Fitness
: ANT+ and BLE
•
Polar: ANT+ and BLE
•
Garmin: ANT+
•
Timex: ANT+
•
Adidas: ANT+
Manufacturers of compatible ANT+ iPhone Receiver Dongles and Cases
•
Wahoo Fitness
: Cases and dongles
Screen Lock: Lock the screen and change the display brightness
Flashlight: Turn on the iPhone’s camera flash LED
US and Foreign Patents Granted and Pending.
Fullpower®, MotionX®, TapTap®, and ShakeShake® are registered trademarks of Fullpower Technologies,
Inc.
All other trademarks remain the property of their respective owners. © Copyright 2003-2013 Fullpower Technologies, Inc. All rights reserved.
8
