13. Setup
(continued)
Bluetooth Low Energy (BLE)
Newer Bluetooth Low Energy heart rate monitors are supported on the iPhone 4S and
iPhone 5 only as BLE requires a specific Bluetooth chipset found only in these devices.
No receiver dongle or case is required and there is no need to pair the BLE HR monitor
with your iPhone first. To set up, be sure Bluetooth is turned on from iPhone
Settings>General. Wear the chest strap, then from MotionX-GPS select
Menu>Setup>Heart Rate Sensor>Manage Sensor>Connect.
Manufacturers of Compatible Heart Rate Chest Straps
•
Wahoo Fitness
: ANT+ and BLE
• Polar: ANT+ and BLE
• Garmin: ANT+
• Timex: ANT+
• Adidas: ANT+
Manufacturers of compatible ANT+ iPhone Receiver Dongles and Cases
•
Wahoo Fitness
: Cases and dongles
• Define a 5-digit channel using the picker wheels. Share your channel with friends
who want to see your location.
• Define an interval for broadcasting your location (ranging from 30sec to 10min). Your
friends’ latest known locations are updated at the interval they have selected.
• Select a radius within which you would like to display your friends’ locations.
• Select a time interval to display your friends’ last known position updates. Choosing
12 hours, for example, will allow you to see their last position broadcast for 12 hours
after they have stopped sending updates.
Auto Live Position Updates will run (GPS chipset will remain active) when MotionX-GPS
is backgrounded if Setup>Multitasking is set to either Optimized or Always On.
TapTap® a friend’s location sign on the map to view the timestamp of their last
location update.
US and Foreign Patents Granted and Pending.
Fullpower®, MotionX®, TapTap®, and ShakeShake® are registered trademarks of Fullpower Technologies,
Inc.
All other trademarks remain the property of their respective owners. © Copyright 2003-2013 Fullpower Technologies, Inc. All rights reserved.
40
