background image

 

 

Safety instructions for the use of immersion oil. 

 

 

Immersion oil is irritating to skin; avoid contact with skin, eyes   

  

and 

clothing. 

 

 

Skin contact: wash with soap and plenty of water until the   

 

  immersion oil is completely removed. 

 

 

Eye contact: flush immediately with plenty of water for at least   

  

minutes. 

 

 

  If irritation persists, seek medical advice. 

 

 

Dispose of immersion oil properly. Do not discharge into surface   

  

water 

or 

sewage. 

 
The biological microscope is not equipped with any special device to protect 
against corrosive, latent infective, toxic, radioactive or other hazardous 
samples. Therefore, when examining any such sample you must comply with 
the relevant laws and regulations, in particular the provisions related to 
accident prevention. 
 

1.6 Quality Warranty

 

The ECO microscope and the attached accessories are only allowed to be 
used for microscope examination as described in this manual. The 
manufacturer takes no responsibility for any other use. 

 

The manufacturer guarantees that the product is free from any defect in   

  material or workmanship on the date of delivery. 

 

If any defect is found, notify the manufacturer immediately. 

 

Upon receipt of the Notification of Defect as described above, the   

  manufacture is responsible to solve the problem either by repairing the   
  defective instrument or replacing it with a new instrument of the same   
 model. 

 

The manufacturer provides no warranty for any failure or defect due to   

  normal wear and tear or improper use of the product. 

 

The manufacturer takes no responsibility for any damage caused by 

  operation error, negligence or unauthorized dismantling of the instrument,   
  or the use of spare parts from other manufacturers. 

Содержание 1100104100051



















Отзывы: