the harness
6
adjusting the shoulder height
1
2
3
4
5
The harness has 3 height positions.
The straps should go into the slots nearest to
the top of your child’s shoulders.
IMPORTANT
If your child's shoulders are between two pairs
of slots,
always
use the higher position.
To adjust the shoulder straps of the harness,
remove one of the shoulder straps from the
metal retaining yoke located at the back of
the seat.
Leave the other one in place for reference.
Pull the shoulder strap through the harness
slot in the shell and cover, then pull through
the shoulder pad.
Pull shoulder pad back through harness slot in
cover and shell, and re-locate to desired
harness slot.
Feed the shoulder strap back through the
shoulder pad, then through the same slot,
and re-attach to metal yoke at rear. Repeat
the same prodedure for the shoulder strap
and pad on the other side. Make sure there
are
no kinks or twists
in the straps.
6
