Operation and Maintenance Manual for PowerKit 6M16 Series
28 of 40
4.3 Regular maintenance of the diesel engine
Table 4-7Maintenance items of the diesel engine
Maintenance item
First inspection
Routine
inspecti
on
WD1
WD2
WD3
WD4
Replace diesel engine oil
●
●
●
●
●
●
Water pump leakage checking
●
●
●
●
●
Replace oil filter
●
Each time when replacing the engine oil
Check and adjust the valve clearance
●
●
●
●
●
Replace fuel filter
●
●
●
●
Cleaning fuel pump strainer
●
●
●
●
Check coolant volume and refill if
necessary
●
●
●
●
●
●
Fasten cooling pipe clamp
●
Fasten intake pipe and hose
●
●
●
●
●
Clean air filter element
●
●
●
Check and tighten the V-belt
●
●
●
●
●
●
Note:“●” refers maintenance is needed.
4.4 Regular maintenance cycle of the diesel engine
Table 4-8Maintenance cycle of the diesel engine
Items
Operation conditions
First inspection
After running 30~50 hours
Routine inspection
Every 250 hours of running
Level 1 maintenance
Every 500 hours of running
Level 2 maintenance
Every 1000 hours of running
Level 3 maintenance
Every 2,000 hours of running
Level 4 maintenance
Every 4,000 hours of running
Note:
The maintenance cycle mentioned here is calculated based on the condition that the engine is running 1500 hours
per year. For engines running time less than 500 hours per year, the maintenance cycle is half. For engines
running time more than 1500 hours per year, the maintenance cycle is 1.5 times of the above.
If the generating set is used for standby power supply, the lubricating oil should be replace every year.
