Operation and Maintenance Manual for PowerKit 6M16 Series
16 of 40
4) Spray solvent into the turbocharger intake/exhaust ports until the oil sealing oil is completely
removed.
5) Add oil to the oil pan as required.
6) Add coolant to the engine cooling system. The coolant should be softened fresh water containing
anti-freeze additives.
Notice: Do not start the diesel engine until it is installed and connected into position. Keep good
ventilation if the engine runs in enclosed environment, make sure that the exhaust gas be discharged
into the atmosphere.
3.2 Hoisting of the diesel engine
When hoisting up and down of the diesel engine, it should be slow and keep the engine crankshaft
centerline horizontal, and never hoist it obliquely or from one side (as shown in figure 3-1).
Figure 3-1 Hoisting of the diesel engine
3.3Installation of the diesel engine
3.3.1 Installation of the diesel engine
When installing, it should be ensure that the axis of diesel engine crankshaft is coaxial with that of
input shaft of external device and flexible coupling should be used so that the crankshaft is not
affected by the additional force originated from the installation avoiding damage of diesel engine
thrust bearing.
3.2.2 Installation of air intake system
The air intake port of the diesel engine should be arranged at the rainproof, cool and ventilated
place with less dust. The intake pipe of diesel engine should have the fewest elbows, and large arc
transition should be used. The air filter at the air inlet should be provided with a protective cover to
Correct
Wrong
