Operation and Maintenance Manual for PowerKit 6M16 Series
15 of 40
Figure 2-8 shows the circuit diagram of the starter. Wiring terminals of the starter:
30 connected to the anode of battery;
31 connected to the ground;
50 connected to the solenoid switch.
Figure 2-8
2.5.3 Storage battery specifications
2
×
12V 165Ah, 180Ah is available.
3. Installation and use of the diesel engine
3.1 Unsealing of the diesel engine
After opening the engine packing case, please first check the engine and its accessories according to
the packing list, and check the engine appearance for damage and loose connections before carrying
out the following operations:
1) Wipe away the rust proof coat or anti-corrosion agent on surfaces of exposed components;
2) Discharge the sealing oil from the fuel filter and fuel system components (it is allowed to run the
engine with load only when the sealing oil is used up and the normal diesel fuel has been supplied).
Notice: The oil seal is only effective for one year, and when the time is up, please get your engine
inspected and take necessary remedies.
3) Rotate the flywheel and spray solvent into the intake pipe until the oil sealing oil in the cylinder
is completely removed.
