Motec LTC, Руководство пользователя

Страница: 12 / 42

12 Introduction
•
In the Name area the default name will appear. The default name matches
the selected CAN Address (LTC1 etc.). If required, the user can specify a
custom name (e.g. Left Bank or Cylinder 4).
•
Select a Standard Sensor type from the drop down menu
OR
Select a Custom Sensor
Note: Custom sensor setups are for advanced users and it is not
recommended for general use.
•
Select a Standard Output Table, generally Lambda to three decimal
places
OR
Use a Custom Table for another type of fuel, e.g. Diesel.
•
Click OK. The configuration updates will be sent to the LTC, this may take
several seconds
LTC-NTK Output Table
The standard output table for the LTC-NTK is
for Lambda to three decimal places. It is
possible for the user to make a custom table to
suit the Air/Fuel ratio of any fuel.
When the Edit button is clicked under Output
Table a table of Normalized Current appears.
The standard Lambda values appear in the
Output column, these numbers can be
modified to reflect Air/Fuel ratio of a specific
fuel. See
Appendix F for details of common
fuels.
Custom tables can be saved using the Save
As button.