manualshive.com logo in svg

Motcom BeCOMS, Руководство пользователя, Страница: 39 / 82

Поделиться
Скачать
Motcom BeCOMS Скачать руководство пользователя страница 39

motcom

®

 BeCOMS

®

 

User Manual

Release 

220601

Page 5.1

Fig. 5.1

 Example for the Installation position

!

5 Installation and Commissioning

Installation and commissioning of BeCOMS

®

  must be conducted or supervised by 

personnel from motcom GmbH or its authorized representatives only.

The installation procedure includes training for the site operation personnel. The 

commissioning data will be provided to the customer as part of the training for later 

reference.

During the initial installation the current BeCOMS

®

 wiring will be adapted to the 

existing alarm and monitoring system on site.

For further details please refer to the separate Installation Manual.

5.1 Installation Position

The Slip Ring Encoder  is installed at the end of the crankshaft of the combustion 

engine via an engine specific adapter (refer to Fig.5.1 and Fig.5.2). The evaluator 

can be installed in the engine room near the engine or, alternatively, in the engine 

control room. The length of signal cables must not exceed 100 m.

!

Содержание BeCOMS



















































































Отзывы:

Нет отзывов