Motcom BeCOMS, Руководство пользователя, Страница: 37 / 82

motcom
®
BeCOMS
®
User Manual
Release
220601
Page 4.11
Table 2 Setup CPU Details
Level 1 Level 2 Level 3 Descriptions
LCD brightness
Brightness of Evaluator LC display in the range of 5 to 100. The higher the
value, the brighter is the display.
LCD large font
Selection of font
0 = 7x12 System
1 = Consolas
2 = Lucidas Console
RS485 fullduplex
RS485 transmission mode. Possible values:
OFF: two-wire mode. Sending and receiving data simultaneously is
not possible.
ON: four-wire full-duplex mode. Allows communication in both
directions simultaneously.
Modbus enable
Enable or disable (values ON and OFF accordingly) the Modbus interface.
Modbus address
Modbus address in the range of 0 to 99.
PIN for Setup
PIN for enabling write access to menu items in “Setup Parameter”, “Setup
CPU” and “Test Features”.
To enter PIN: press [Enter], the PIN field becomes highlighted. Use [▲]
and [▼] buttons to increase or decrease the value. When the correct PIN
appears in the value field, press [Enter] again. This screen appears again,
and the system parameters can be changed now. If wrong PIN was entered,
text in the PIN field will be changed to “P??”.
Software Info
Firmware version of the Evaluator (read-only).