17
Setup
The setup pages allow setting of a variety of operating set-
tings arranged over 22 pages. Press the
[BUTTON-SETUP]
but-
ton to enter the setup pages.
Press
[BUTTON-LEFT]
and
[BUTTON-RIGHT]
to navigate the pages.
On each page press
[BUTTON-UP]
and
[BUTTON-DOWN]
to move
between the options and use the [ROTARY ENCODER] to
change the values. For fast value changing push the [RO-
TARY ENCODER] and turn at the same time.
Press
[BUTTON-UP]
and
[BUTTON-DOWN]
simultaneously to al-
ways jump to the first option on a page. Press
[BUTTON-
LEFT]
and
[BUTTON-RIGHT]
simultaneously to jump to SETUP
PAGE1.
When you leave the setup pages the settings are saved to
internal non-volatile memory (and so will be remembered
when you power the unit off and on again) – except for
patch-specific parameters as detailed below.
The current setup page is shown in the bottom right of the
display.
17.1 Patch settings 1
Here settings for the current patch can be set. Settings
for the current patch are not saved automatically (but of
course will be saved when the patch itself is saved).
PORTA MODE sets the portamento (glide) mode of the
current patch. OFF turns off portamento, LEGAGO gives
portamento when notes are held and ALWAYS always gives
a portamento effect.
PORTA TIME/RATE sets the portamento mode to constant
TIME or constant RATE.
PORTA VALUE sets the portamento time or rate. In TIME
mode the time elapsed for the pitch to reach the new value
can be set from OFF (immediate) to a maximum of 2.34
seconds. In RATE mode the rate of change of pitch can be
set from OFF (immediate) to the slowest rate of 73 cents
per second. Depending on the setting the rate will be shown
as octaves per second O/S, semitones per second S/S or
cents per second C/S.
TRACK NOTE-OFF sets whether the
pitch of the oscillators can update and the envelope gen-
erators can re-trigger after note-off events. There are 3
options: OFF, PITCH and P+EG. With settings PITCH and
P+EG the pitch of the oscillators can update on note-off
events. With setting P+EG re-triggering of the EGs is en-
abled on note-off events.
i
[INFO] if oscillator pitch is set to track
’highest’ note then setting OFF the pitch will not
change when the highest note is released. How-
ever, with setting PITCH or P+EG the pitch may
change to track the new ’highest’ note still be-
ing played when the note is released. Similarly if
EG trigger is set to track ’highest’ note then with
the setting OFF or PITCH the EG will not re-trigger
when the highest note is released. However, with
this setting P+EG the EG will re-trigger if there is a
new ’highest’ note still being played when the note
is released.
PITCHWHEEL sets the pitch sensitivity of the current patch
in semitones to incoming MIDI pitchbend. Set from 0 (no
effect) to 24 (for 2 octaves shift at maximum pitchbend
signal).
17.2 Patch settings 2
LFO SYNC SEQ sets whether the LFOs in the patch are syn-
chronised (reset) when the sequence or pattern is re-wound
to the start, play started or a MIDI START real-time mes-
sage is received.
When PATCH is active then the current patch setting is used
(ON or OFF). Alternatively, with GLOBAL active then the
global setting is always used (overriding the current patch
setting).
Custom LFO waveform editing
The 4 custom LFO waveforms can be edited by pressing
the
[BUTTON-LFO X WAVEFORM / INCREASE]
or
[BUTTON-LFO X FRE-
QUENCY / DECREASE]
buttons. Once in edit mode use these
User Guide v1.31 [FOR SCREENREADERS]
page 45
Содержание Motas-6
Страница 2: ......
