Motas Motas-6, Руководство пользователя

Страница: 45 / 62

[BUTTON-MICRO-TUNE]
to edit the microtune (from 0 – 98 cents).
Press
[BUTTON-PATCH]
to edit the patch setting of the note.
A setting of ’-’ means the patch is not changed otherwise
the note will play using the patch value (1–5) set. Note
that the sequence patch change setting (if set and if in se-
quence mode) over-rides these pattern note settings.
When ’page-lock’ and ’value-lock’ are both activated you
can edit the notes using the bank of rotary knobs
1
. The
[KNOB-MASTER PITCH]
knob will edit the first note in the pat-
tern,
[KNOB-OSC-1 LEVEL]
will edit the second note, and so
on.
[TIP] Set up a series of percussive sounds
on fast-access patch slots 1–5 and use the
[BUTTON-
PATCH]
settings to play the different sounds in the
pattern for a rhythm track. MOTAS-6 can change
sounds very rapidly (< 1ms) and so you can enjoy
quite complex multi-sound patterns. You can also
edit the sounds as you play!
Discrete parameter/Continuous parameter/Modulations
edit pages
There are 3 pages with editing features in common. To
record events press
[BUTTON-EG DECAY/RECORD]
and adjust patch
settings/controllers to record changes as the pattern is play-
ing. Whilst recording the changes are not played back, and
the recording is always in ’overwrite’ mode.
There are 2 edit modes: press
[BUTTON-PITCH]
/
[BUTTON-VELOCITY]
to enter ’change value’ mode. Alternatively, press
[BUTTON-
TIME]
/
[BUTTON-DURATION]
/
[BUTTON-MICRO-TUNE]
/
[BUTTON-
PATCH]
to enter ’change time’ mode.
Press and hold
[BUTTON-UP]
to create a series of new val-
ues and then use the
[BUTTON-LEFT]
and
[BUTTON-RIGHT]
but-
tons to select the events and the [ROTARY ENCODER] to
change the values/times.
Press and hold
[BUTTON-DOWN]
to delete a series of values.
i
[INFO] To create new discrete or continuous
events enter record mode and adjust the patch set-
tings as the pattern plays. These recorded events
can be then be edited. Note that only the value
of the event, not the type, can be edited. For ex-
ample, if events of type ’master pitch’ have been
recorded these events cannot be changed to an-
other type such as ’lpf1 resonance’.
Discrete parameter edit page
Press
[BUTTON-PARAMS]
to view, edit and delete discrete patch
parameters (such as changes to the filter routing). Press
[BUTTON-PARAMS]
repeatedly to toggle on/off playback of
the values.
Continuous parameter edit page
Press
[BUTTON-PARAMS-C]
to view, edit and delete continu-
ous patch parameters (such as filter cut-off frequency). Press
[BUTTON-PARAMS-C]
repeatedly to toggle on/off playback of
the values.
i
[INFO] Note that (due to memory limita-
tions) the number of discrete and continuous pa-
rameter events that can be stored is limited to 290
per pattern.
Modulations edit page
Press
[BUTTON-MODS]
to view, create, edit and delete events
for modulations M1, M2, M3 and M4. Press
[BUTTON-MODS]
repeatedly to toggle on/off playback of the values.
Edit pattern start/end time
The start and end times are each pattern can be set. Press
the
[BUTTON-PATTERN START]
or
[BUTTON-PATTERN END]
and turn
the [ROTARY ENCODER] to edit the start/end times.
User Guide v1.31 [FOR SCREENREADERS]
page 40