Motas Motas-6 Скачать руководство пользователя страница 10

Страница: 10 / 62

There are 16 slots of advanced modulation. This powerful

feature allows complex chains of modulation from many

sources to be applied to a vast choice of destinations. There

is wide choice of ’functions’ available that are applied to up

to 2 sources for each destination, with adjustable modula-

tion depth for each slot.

User interface

Dedicated analogue rotary potentiometers are used to ac-

cess the basic analogue parameter pages and to allow fast

’tweaking’ in real-time. In addition MOTAS-6 uses a rotary

[ROTARY ENCODER] in combination with tactile push but-

tons

[BUTTON-PUSH-1]

for data entry and editing.

Display

MOTAS-6 has an OLED (organic light emitting diode) dis-

play with a fast update rate and wide viewing angle. The

display intensity can be adjusted.

External connections

MOTAS-6 has traditional MIDI input and MIDI output con-

nectors in addition to USB MIDI. USB MIDI allows faster

data transfer to and from a PC and MOTAS-6 is recognised

as a standard MIDI device (no special drivers should be needed).

There are four independent analogue CV/gate inputs to al-

low playing/modulation from external analogue sequencers,

controllers and modular synthesizers.

The main audio output is monophonic and in addition there

is a mono headphone output (on a stereo connector).

Other features

MOTAS-6 has a flexible arpeggiator. There are global and

patch-specific arpeggiator settings. The play mode, oc-

tave range, pattern, note length and swing can be adjusted

and synced to MIDI, CV or internal clock. A special global

mode allows rapid patch changing as the arpeggiator plays.

The pattern sequencer allows 1-bar patterns to be entered

where each note in each pattern can be adjusted for pitch,

velocity, time, duration, micro-tune and patch change. Real-

time sound parameter changes can be recorded and edited

too. Patterns can be arranged into a 2-line simple sequence

with pattern repeat, transpose, time offset and patch set-

tings.

More than 500 sound patches can be saved to non-volatile

memory.

MOTAS-6 has 32 built-in microtuning scales and allows a

further 32 scales to be defined and stored using standard

MIDI bulk tuning commands.

There is a useful oscilloscope and spectrum analyser fea-

ture that allow the user to study the output signals on the

display.

Integration with external software

Free software including DAW plugin software is available

to download from

www.motas-synth.uk/downloads.html

This allows live control between MOTAS-6 and your com-

puter and patch/sequence archiving, firmware updating and

more.

Firmware updates

MOTAS-6 firmware updates are available from time-to-time

to add new features and make other improvements. These

can be downloaded and applied using the free software

provided from

www.motas-synth.uk/downloads.html

User Guide v1.31 [FOR SCREENREADERS]

page 5

Содержание Motas-6































































Результаты поиска

Содержание Motas-6

Отзывы:

Похожие инструкции для Motas-6

Бренды по названию

Популярные бренды

Motas Motas-6, Руководство пользователя

Результаты поиска

Содержание Motas-6

Отзывы:

Похожие инструкции для Motas-6

Бренды по названию

Популярные бренды