Moseley Starlink SL9003Q, Руководство пользователя, Страница: 83 / 141

Section 5: Module Configuration 5-19
Moseley SL9003Q 602-12016-01 Revision J
7) Use left or right arrow to select setting 0, 1 or 2
8) Press the <ENTER> button.
9) Press the <ESC> button twice
10) Use left or right arrow to select Yes to save settings
11) Press the <ENTER> button.
To set “Map Faults-Relays”, perform the following steps:
1) On the SL9003Q Tx Main Menu, use Up or Down arrow to select System
2) Press the <ENTER> button.
3) Scroll down to External I/O
4) Press the <ENTER> button.
5) Scroll down to Map Fault-Relays
6) Press the <ENTER> button.
7) Use left or right arrow to select Off or On for Map to Relays
8) Press the <ENTER> button.
9) Press the <ESC> button twice
10) Use left or right arrow to select Yes to save settings
11) Press the <ENTER> button.
In a Receiver
Relay 2: pins 5 (-) and 6 (+)
• Any Fault or Alarm or Equipment Power Off: Relay 2 = Off (Set Open)
• No Faults or Alarms and Equipment Power On: Relay 2 = On (Set Closed)
Relay 3: pins 3 (-) and 4 (+)
• Receive RSL < -100dBm or Equipment Power Off: Relay 3 = Off (Set Open)
• Receive RSL > -100dBm and Equipment Power On: Relay 3 = On (Set Closed)
Relay 4: pins 1 (-) and 2 (+)
• Pre-BER > 1E-4 or Equipment Power Off: Relay 4 = Off (Set Open)
• Pre-BER < 1E-4 and Equipment Power On: Relay 4 = On (Set Closed)
In a Transmitter
Relay 1: pins 7 (-) and 8 (+)
• Tx control set OFF or transfer set COLD and unit is not Selected or Equipment Power Off:
Relay 1 = Off (Set Open)
• Tx control set ON or AUTO or transfer set COLD and unit is selected and Equipment
Power On: Relay 1 = On (Set Closed)
Relay 2: pins 5 (-) and 6 (+)
• Any Fault or Alarm or Equipment Power Off: Relay 2 = Off (Set Open)
• No Faults or Alarms and Equipment Power On: Relay 2 = On (Set Closed)