manualshive.com logo in svg

Moseley Starlink SL9003Q, Руководство пользователя, Страница: 65 / 141

Поделиться
Скачать
Moseley Starlink SL9003Q Скачать руководство пользователя страница 65

Section 5: Module Configuration 

5-1 

Moseley SL9003Q 

 

602-12016-01 Revision J 

5. Module Configuration 

5.1 Introduction 

This section provides the experienced user with detailed information about the board level 
switches, jumpers and test points that may be necessary to configure or troubleshoot 

modules in the SL9003Q. 
This information is provided for advanced users only, or can be used in conjunction with a 

call to our Technical Services personnel. Changing these settings may render the system 
unusable. Proceed with caution! 

5.2 Audio 

Encoder/Decoder 

The Audio Encoder accepts digital or analog audio. A/D conversion is performed for the 

analog inputs. The stereo digital audio is encoded for linear (or MPEG) operation. The 
resulting data stream is applied to the QAM modulator or MUX. An auxiliary data channel is 

available. 

 

Figure 5-1. Audio Encoder Front Panel 

The Audio Decoder accepts the data streams from the QAM demodulator or MUX. The data 
is decoded for linear (or MPEG) stereo digital audio output. D/A conversion is performed for 
the analog outputs. An auxiliary data channel is available. 

Содержание Starlink SL9003Q














































































































































Отзывы:

Нет отзывов