Mosa TS 350 YSX BC Скачать руководство пользователя

Страница: 11 / 58

SYMBOLS AND SAFETY PRECAUTIONS

2-1

REV.2-06/10

SYMBOLS

STOP

Read absolutely and be duly attentive

Read and pay due attention

GENERAL ADVICE -

If the advice is not

respected damage can happen to persons or

things.

HIGH VOLTAGE -

Attention High Voltage.

There can be parts in voltage, dangerous

to touch. The non observance of the advice

implies life danger.

FIRE -

Danger of flame or fire. If the advice is

not respected fires can happen.

HEAT -

Hot surfaces. If the advice is not

respected burns or damage to things can be

caused.

EXPLOSION -

Explosive material or danger

of explosion. in general. If the advice is not

respected there can be explosions.

WATER -

Danger of shortcircuit. If the advice

is not respected fires or damage to persons

can be caused.

SMOKING -

The cigarette can cause fire or

explosion. If the advice is not respected fires

or explosions can be caused.

ACIDS -

Danger of corrosion. If the advice is

not respected the acids can cause corrosions

with damage to persons or things.

WRENCH -

Use of the tools. If the advice is

not respected damage can be caused to things

and even to persons.

PRESSION -

Danger of burns caused by the

expulsion of hot liquids under pressure.

PROHIBITIONS

No harm for persons

Use only with safety clothing -

It is compulsory to use the personal

protection means given in equip-

ment.

Use only with safety clothing -

It is compulsory to use the personal protection

means given in equipment.

Use only with safety protections -

It is a must to use protection means suitable for

the different welding works.

Use with only safety material -

It is prohibited to use water to quench fires on

the electric machines.

Use only with non inserted voltage

It is prohibited to make interventions before

having disinserted the voltage.

No smoking

It is prohibited to smoke while filling the tank

with fuel.

No welding

It is forbidden to weld in rooms containing

explosive gases.

ADVICE

No harm for persons and things

Use only with safety tools, adapted to the specific

use -

It is advisable to use tools adapted to the various

maintenance works.

Use only with safety protections, specifically suitable

It is advisable to use protections suitable for the

different welding works.

Use only with safety protections

It is advisable to use protections suitable for

the different daily checking works.

Use only with safety protections

It is advisable to use all protections while

shifting the machine.

Use only with safety protections

It is advisable to use protections suitable for

the different daily checking works.and/or of

maintenance.

26/1

1/99 M2-1GB

ACCES FORBIDDEN

to non authorizad

peaple.

Содержание TS 350 YSX BC



























































Результаты поиска

Содержание TS 350 YSX BC

Отзывы:

Похожие инструкции для TS 350 YSX BC

Бренды по названию

Популярные бренды

Mosa TS 350 YSX BC, Руководство по эксплуатации и обслуживанию

Результаты поиска

Содержание TS 350 YSX BC

Отзывы:

Похожие инструкции для TS 350 YSX BC

Бренды по названию

Популярные бренды