![Mosa MS 200 S Скачать руководство пользователя страница 10](http://html1.mh-extra.com/html/mosa/ms-200-s/ms-200-s_use-and-maintenance-manual_1836913010.webp)
18/09/95 10160 M5 - I
OPERATING INSTRUCTIONS
MS 200 S - MSG 200/CHOPPER
M
5
© MOSA
1.0-
PRECAUTION BEFORE USE
WARNING
!
•
Stop engine when fueling.
•
Do not smoke when fuelíng.
•
Remove cap slowly to release
pressure.
•
Do not overfili tank.
•
Wipe up spilied fuel and allow
fumes to clear before starting
engine.
•
Keep sparks and fiame away from
tank.
•
Shut off fuel at tank when moving
machine.
FUEL
The engine requires a 50:1 Fuel-Oil mixture. Use a good
quality two-cycle oil rated for air-cooled engines (chainsaws,
lawnmowers, snowmobiles). Do NOT use two-cycle oil for
marine engines.
The proper 50:1 mixture is obtained by using 2.5 ounces of
two-stroke oil for every gallon of gasoline. This is equivalent
to 20 ml every liter.
An incorrect fuel-oil mixture can damage the engine. It
is
advisable to premix fuel-oil in a special container according to
the instructions for a 5O: 1 mixture as shown on commer-cially
available cans of two-cycle air-cooled engine oil.
INSTALLATION
GASOLINE
can cause fire
or explosion
WARNING
!
•
Use in open, well ventilated area
or vent exhaust outslde.
ENGINE EXHAUST
can kill
POSITION
Place the welder on a flat, level surface and assure an
unrestricted flow of clean fresh air. Vent the exhaust outside.
EXHAUST SPARK ARRESTOR
Some federal, state or local laws may require that gasoline
engines be equipped with exhaust spark arresters when they
are operated in certain locations where un-arrested sparks
may present a fire
hazard. The standard mufflers included
with these welders do not qualify as spark arresters. When
required by local regulations, suitable spark arresters must be
installed and properly maintained.
PRECAUTION TO USE
•
Do not touch electrically live parts
or electrode with skin or wet
clothing.
•
lnsulate yourself from work and
ground.
•
Always wear dry insulating gloves.
ELECTRIC SHOCK
can kill
•
Keep flammable material away.
•
Do not weld on containers which
have held flammable materials.
WELDING SPARKS
can cause fire
or explosion
•
Keep your head out of fumes.
•
Use ventilation or exhaust to
remove fumes from breathing zone
FUMES AND
GASES
can be dangerous
•
Wear eye, ear and body protection.
ARC RAYS can burn
NOISE can
damage hearing
WARNING
!
Содержание MS 200 S
