Mortara Quinton CR60 Скачать руководство пользователя страница 41 | Manualshive

Страница: 41 / 62

Mortara Quinton CR60 Скачать руководство пользователя страница 41

MAINTENANCE/TROUBLESHOOTING

33

Moving and Storing the Treadmill

WARNING!

Moving the treadmill requires two people.

1.

Set the treadmill to 3 to 5% grade.

2.

To avoid electric shock, turn off the treadmill circuit breaker. Remove the power cord from the power source.

WARNING! Pinch hazard.

As long as the treadmill is plugged into a powered outlet and the treadmill circuit breaker is set to ON, the
treadmill is receiving power, even when the controller is turned off. Do not place hands beneath the
treadmill while it is plugged in.

3.

Together, lift the rear of the treadmill, then roll it to the new site using the wheels on the front of the treadmill.

When storing for prolonged periods, cover the treadmill with a dust cover. Do not store in damp areas. Do not store
the treadmill on its end as it could fall on someone.

Re-use

Before using the treadmill again after moving or storage, check the power cord and all attachments to be sure they
are undamaged and securely connected, then test the system for proper operation.

Troubleshooting

If the walking belt does not run, press the

Power

button twice. This may eliminate the fault.

If problems persist, refer to the Troubleshooting Guide that follows. Problems beyond the scope of this table may
require service assistance to isolate and correct. Contact Mortara Technical Support for information: 800-426-0337.

WARNING! Electric shock hazard.

Do not remove the treadmill hood: Dangerous voltages are present. There are no operator-serviceable
components.

Caution. Authorized service only.

Servicing should be done only by an authorized technician who should consult the service manual before
attempting any in-depth troubleshooting..

«
...
39
40
41
42
43
...
»

Содержание Quinton CR60































































Отзывы:

Нет отзывов

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды