Mortara Quinton CR60, Руководство пользователя

Страница: 32 / 62

OPERATING THE TREADMILL
24
Five-minute Auto Reset
If you do not use the treadmill within five minutes after entering the weight and exercise time or within five minutes
after pressing
Stop Belt , the controller automatically resets the elapsed time and distance to zero and prompts you to
enter the weight.
Limited-Access Control
A limited-access control lets you restrict treadmill use to authorized personnel. It also lets you stop the treadmill
quickly in an emergency. The invisible, magnetically-activated control is located behind the magnet logo on the
bottom left side of the controller.
Activation
The treadmill ships from the factory with the limit-access control deactivated. Anyone can turn on the
treadmill. To activate the control, place the magnetic key supplied with the treadmill precisely over the
magnet logo on the front panel of the controller. The magnet will activate the control.
Figure 4 Activate Limit Access Control
Once the control is activated, the treadmill will not start, nor will the displays light up, unless the magnetic
key is on the logo. If you remove the key, the belt will stop, the
Start Belt and Grade keys will be
disabled, and the word “SAFE” will appear in the center display. Accumulated values will remain on
display until you turn off the power.
To restart the treadmill, replace the magnetic key, then, if the power key on the controller is on, press Start
Belt ; if the power key is off, press Power .