manualshive.com logo in svg

Mortara Instrument ELI 25O, Руководство пользователя

Поделиться
Скачать
Mortara Instrument ELI 25O Скачать руководство пользователя страница 54

SECTION 4

Storage

The ELI 250 manages storage in one of two ways – automatically or manually. When the Auto Save
configuration option is enabled, ECGs are automatically saved upon acquisition and printing. However,
when the Auto Save configuration option is disabled, upon completion of acquisition, a prompt is
presented as follows and saving the ECG record is at the user’s discretion.

NOTE:

If Auto Save is enabled, but the ECG is not printed, the user is prompted to save.

TIP:

Manual Save is possible by selecting 

More

(

F5

) and 

Save

(

F5

) in the Acquired 

ECG View.

Acquiring Rhythm Strips

Rhythm strips are printed in the format defined in the configuration (3-channel, 6-channel, or 12-channel).
See section 3 for instructions to configure rhythm leads.

Begin routine rhythm strips by connecting the patient to the ELI 250 and entering the patient identification
information as described in this section. After the last data entry field from the ID menu is completed,
select 

Done

(

F6

) to return to the Real-Time ECG View. Select the 

RHY

key            to begin rhythm printing.

NOTE:

Rhythm printouts are only possible from the Real-Time ECG View.

NOTE:

Rhythm acquisitions are only printed and not stored in the electrocardiograph.

4-8

Save

Save ECG?

Delet

Содержание ELI 25O

























































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды