25
Mounting
Remove or fix any existing damper in the chimney in the open position.
It is important that there are a few millimetres between the insert box and the surrounding ma-
sonry. Otherwise, the thermal expansion of the insert box may cause cracking of the masonry.
As an initial estimate, the dimensions of the insert opening in the masonry are 870 mm.x550
mm.x510mm. (width x height x depth).
The insert must be levelled with the levelling screws. Note that the insert box must be even
(flush) with the masonry.
The insert is connected to the chimney by a 150 mm in diameter flue pipe that is fastened
to the flue collar.
Seal between the flue pipe and the masonry chimney with refractory mortar. A thermal ex-
pansion of the flue pipe may cause cracking of the refractory mortar. Therefore, it is impor-
tant to use a wall bushing and sealing cord.
If there is no cleaning door as shown in the drawings, it may be advantageous to install one.
This will make the installation of the flue pipe easier, and in some cases, the chimney sweep
may require one.
For the Morsø S80-90 stove, you will need to connect a 45 degree pipe bend or a flexible pipe to the
cast-iron flue pipe (1). With the pipe bend, you can achieve both horizontal and vertical smoke outlet,
depending on which way you turn the
pipe bend when you fit it.
The installation should be done mak-
ing it possible to remove the insert lat-
er on, if necessary, without damaging
the masonry or other materials around
the insert.
Positioning of baffles
The baffles (2) and (3), made from ver-
miculite, have been positioned when
you receive the stove.
However, it is necessary that you check
that they are correctly positioned be-
fore you light your stove for the first
time (please refer to the diagram).
2
3
1
Revisions
Rev.
Sign.:
Title:
Drawing no.:
1:5
Snit til vejledning
S80-90
RSV
22.10.10
A4
Date of print: 22-10-2010
U:\udv\Tegninger\Pladejernsovne 2010\S80_90 - 23.07.2010\115A_0000_001_ASM.sldasm
S80-06 a
Itemno.:
This drawing is Morsø Jernstøberi A/S' property and must not be sold, lended or copied without any written authorization from the company.
Material:
Weight:
Model no.
Drawingtype:
Location of file:
Scale:
Format:
Released:
Construction:
Date:
Содержание S80-90
Страница 20: ...20 G ...
Страница 27: ...27 600 25 100 Min Date of print 22 10 2010 This draw Material Weight Model n Drawing Location of C C F 5 ...
Страница 38: ...38 G ...
Страница 39: ...39 ...