15
14
Replace broken glass immediately.
Do not operate your stove if the glass in the door is damaged.
If you need to replace the glass, it should be replaced with the high temperature ceramic class
supplied by Morsø, contact your Morsø dealer.
Installing the glass
Never install the glass when the stove is in function.
Ceramic glass replacement
Ceramic glass cannot be recycled because it has a higher
melting point that ordinary glass. If ceramic glass is mixed
with ordinary glass, the raw material is spoiled, and the re-
claiming process may be halted. Take care that the ovenproof
glass does not end up among ordinary recycled waste. That
will be a great benefit to the environment.
Note: Should be handed in to a recycling station as ceramic
glass.
Reasons for dirty glass
· Fuel too wet
· Logs too large or not split
· Combustion temperatures too low
3.0 MAINTENANCE
When perfoming maintenance on your stove, always protect yourself, using safety
goggles and gloves.
3.1 Exterior Maintenance
The stove surface is painted with heat-resistant Senotherm paint. It is best kept clean by
vacuuming with a soft brush attachment or by wiping with a lint-free cloth.
Over a period of time, the painted surface may become slightly grey. A can of Morsø touch-up
spray paint should be available from your stove supplier. This can be applied - in accordance
with the instructions - in just a few minutes. When first firing after touching up, the stove will give
off a slight smell as the paint cures. Make sure to ventilate the room well during this phase.
3.2 Internal maintenance
Glass
If the stove is generally run at the correct temperatures, there should be little or no dirt on the
glass. If dirt does settle during lighting, most will burn off as temperatures increase.For heavier
deposits that will not burn off, use morsø glass cleaner, applied when the glass is cold, in
accordance with the instructions. Never use abrasive cleaners on the glass surface.
Revisions
Rev.
Sign.:
Title:
Drawing no.:
1:5
Glasmontering 7600 NA
Glass mounting 7600 NA
Morsø 7600
RSV
01.03.2010
A4
Assembly
128,21 kg
Date of print: 01-03-2010
U:\udv\Tegninger\7600\7600 Assembly.SLDASM
7600-119 a
-
Itemno.:
This drawing is Morsø Jernstøberi A/S' property and must not be sold, lended or copied without any written authorization from the company.
Material:
Weight:
Model no.
Drawingtype:
Location of file:
Scale:
Format:
Released:
Construction:
Date:
Содержание 7670
Страница 7: ...7 ...
Страница 24: ...24 Morsø jernstøberi A S 09 03 2012 72761600 ...
