morse 520M-114 Скачать руководство пользователя страница 6

Страница: 6 / 6

The Specialist In Drum Handling Equipment

Model 520M-114

Vertical-Lift, 106”, with Spark Resistant Parts,

Air Power Lift and Tilt

Operator’s Manual for Morse Vertical-Lift Drum Pourer Model 520M-114

Serial Number 249855 to ______

morsedrum.com

Form PL520M-114 (249855-______)

(Updated 2 Mar., 2022)

Maintenance

Periodic inspection for the general condition of structural and mechanical components is imperative for safe and efficient operation.

2. Periodically inspect all moving parts, framework, drum holder and contact areas for signs of wear, fatigue, or loosening. Tighten,

adjust, or replace parts as necessary to prevent failure and maintain proper function.

Inspect the hydraulic system for oil drips, hose damage, or other signs of wear. Inspect the level of the hydraulic fluid. Replace any

parts that show signs of wear.

4. Grease wheel bearings periodically. Oil or grease all moving parts, including: the gears and sprockets in the tilt drive, and the ratchet

and pawl.

5. Worn or damaged parts must be properly replaced with the correct, genuine Morse parts.

Hydraulic pump is shipped filled with Noco Premium plus automatic transmission fluid d/m. Material safety data sheet (msds) is

available online. Change oil yearly, sooner depending on dirty conditions or outdoor use. Replace oil with Mobil dte 24 or equivalent

for indoor use (Mobil dte 13 for outdoor use).

Содержание 520M-114






