Morris CX 8105, Руководство оператора

Страница: 50 / 182

Operation
5-16 December 2016 CX 8105 - Ground Drive
Important
Before putting product into the tanks check the
following:
1. The correct seed plate is installed for product
being applied.
2. The clean-out doors are fully closed and
sealed.
3. The plastic bag covering the fan is removed.
4. Inspect all augers used in handling the
products for seeding. Run augers to clean
out any debris inside auger so it does not get
transferred to air cart tanks.
Warning
Do not enter tank unless another person is
present.
Bin Level Adjustment
• Adjust bin level sensor to desired alarm point.
- Top position for large seeds, high rates of fertilizer.
- Middle postion for cereal grains.
- Lower postion for fine seeds.
Filling Tank
The Morris 8105 Air Cart is equipped with 2 tanks. The
front tank is for seed and the rear tank is for fertilizer. The
optional third tank is for use with small seeds. However,
ALL tanks can be used for the same product.
• Open lid fully on tank being filled.
• Check and remove any debris inside tank.
• Remove clean-out door.
• Remove seed plate.
• Check for debris inside metering body.
• Ensure Tank Shut-Offs work freely.
Inspect Metering Body
BIN LEVEL SENSOR