Morphy Richards IB40620, Руководство пользователя

Страница: 4 / 8

4
○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○
Components of your iron Components of your iron
Components of your iron Components of your iron
Components of your iron
Shot of steam button
Variable steam control
Spray button
Filling hole with flap
Spray nozzle
Soleplate
Water tank
Digital LCD display
Function button
Anti-scale cartridge
Filling beaker
○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○
Before use Before use
Before use Before use Before use
Note : The steam facility should only be used
on garments which are suitable for ironing at the
2 dot, 3 dot and MAX setting.
Textiles and clothes are supposed to carry
ironing instructions. If they don’t you should follow
the fabric guide on the rear of the iron, but be
sure to test the temperature by ironing the hem of
the garment or similar area first.
If you turn the temperature down from a hot
setting to a cooler setting, wait until the iron
temperature has stabilised before you continue
ironing.
○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○
Filling Filling
Filling Filling
Filling
1 Make sure that the iron is not plugged in and
then set the variable steam control to the
“0” position before filling the iron with water.
2 Open the fill flap and fill the water through
the filling hole into the water tank , using
the beaker provided. In hard water areas
the use of distilled or demineralised water is
recommended.
Never use battery topping-up fluid or
water containing any substances like
starch or sugar, or defrosted water from a
refrigerator.
3 Always pour out the remaining water after
use.
WARNING : When filling your iron with
tap water always use the beaker
provided. Never fill directly under the
tap.
○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○
Temperature controls Temperature controls
Temperature controls Temperature controls
Temperature controls
Plug in the iron and switch on. The tempera-
ture will default to the MAX setting. , and one
beep can be heard, but don’t start ironing
immediately. If you wait a few minutes, the iron
will stabilise at the required setting.
•
To indicate that the iron is heating up arrow
above the thermometer symbol will flash.
•
To indicate that the iron is cooling down the
arrow below the thermometer will flash.
This is perfectly normal as it shows that the
iron is maintaining the heat setting you have
chosen.
MAX
DIGITAL SYEAM 13/8/02, 12:29 PM 4