background image

3

Electrical  requirements

Electrical  requirements

Electrical  requirements

Electrical  requirements

Electrical  requirements

Check that the voltage on the rating plate of

your appliance corresponds with your house
electricity supply which must be A.C.
 (Alternating current).

If the socket outlets in your home are not

suitable for the plug supplied with this appliance
the plug should be removed and the appropriate
one fitted.

IMP0RTANT : THE PLUG REMOVED FROM

THE MAINS LEAD, IF SEVERED, MUST BE
DESTROYED AS A PLUG WITH A BARED
FLEXIBLE CORD IS HAZARDOUS IF
ENGAGED INTO A LIVE SOCKET OUTLET.

Should the fuse in the 13 amp plug require

replacement, a 13 amp BS1362 fuse must be
fitted.

WARNING : THIS APPLIANCE MUST BE

EARTHED.

Anti-scale models only
13 
Keep the anti-scale sachet out of reach

of children.

14 Wipe up spilt anti-scale granules

immediately.

15 If the granules come into accidental

contact with the eyes, flush them with
water for at least 15 minutes and
remove all particles. Consult a
physician if irritation persists.

16 If the granules come into accidental

contact with the skin, remove particles
and wash with water.

17 Do not remove the anti-scale cartridge

from the iron, unless the tank is empty.

18 When filling, ensure that the iron is

disconnected from electrical outlet, and
that  the cartridge is inserted correctly.

Temperature guide

Heat setting markings on the adjustable control dial of all Morphy Richards irons match those of the

international Textile Care Labelling Code.

Symbol

Control knob
positions

Fabric

Ironing

With water in tank

Without water in tank

(120

C Max) Cool

(160

C Max) Warm

(210

o  

C Max) Hot

Do not iron
at all

Nylon, Acetates
e.g. Acrilan
Courtelle, Orlon
Triacetates, e.g.
Tricel/Polyester

Wool, polyester
mixtures e.g.
Polyester/Cotton

Cotton, linen
Rayon, Rayon
mixtures,
e.g. Rayon/Linen

Iron on wrong side.
If moisture required
use damp cloth
(Not Acetate)

Fabrics requiring this
setting usually require
steam pressing for
heavy cotton, denim
etc

Dry and spray

Steam/spray/shot of steam

Dry ironing

Instructions  for  use

Instructions  for  use

Instructions  for  use

Instructions  for  use

Instructions  for  use

Jet clean

DIGITAL SYEAM

13/8/02, 12:29 PM

3

Содержание IB40620









Отзывы: