Morphy Richards IB40620, Руководство пользователя

Страница: 5 / 8

5
Variable Steam
Fill the iron with water as described in “Filling”,
page 4 and insert the plug into the electrical
socket.
Press the function button until the 2-dot,
3-dot or MAX setting is displayed (as required)
and rest the iron on it’s heel whilst it warms up.
The heating up arrow
icon will disappear when
the iron is at the correct temperature.
Turn the variable steam control to give the
desired amount of steam .
The steam facility should only be used on
garments which are suitable for ironing at the 2
dot, 3-dot or MAX setting.
Shot of steam
Press the shot of steam button to obtain a
burst of extra steam for ironing out creases in
heavy material such as denim etc.
The shot of steam can be used whilst dry
ironing, providing there is water in the tank, and
the temperature control is set to the steam
position.
Do not use shot of steam at temperatures
below 2-dot.
Note : For optimum steam quality, do not
operate the shot more than three times in
succession.
Vertical steam
Hold the iron in a vertical position between
1 cm and 2 cm away from the item. Press the
shot of steam button, this will create vertical
steam. This feature is especially useful for
removing creases from hanging clothes, curtains,
wall hangings,
etc.
•
When your iron reaches the correct
temperature
for the first time it will beep twice.
The arrow icon will also stop flashing to show
that the iron has reached the correct
temperature.
To adjust the temperature setting depress the
FUNCTION button a beep will be audible
every time the function button is pressed. The
temperature will cycle up and down
(MAX - 3 dot - 2 dot - 1 dot - 2 dot...etc) and will
be indicated on the LCD display.
It is always a good idea to begin with ‘cool’
fabrics and work up to higher settings.
An iron heats up quicker than it cools down so
you’ll save time and electricity.
○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○
Features of your iron Features of your iron Features of your iron Features of your iron Features of your iron
Dry ironing
You can use your iron as a dry iron only. Make
sure the variable steam control is set to the
“0” symbol.
Any temperature setting may be used
depending on the garment. The spray feature
may be used provided there is water in the tank
(see filling section). You do not need to put any
water in the tank when dry ironing only.
Spray
Press the spray button and aim the spray
of water at stubborn creases. You can do this
whilst dry ironing providing there is water in the
tank. When using the water spray it may be
necessary to push the button a few times to get
the spray pump primed.
High
Low
Off
DIGITAL SYEAM 13/8/02, 12:29 PM 5