Morphy Richards 48920, Инструкция по эксплуатации

Страница: 8 / 12

8
Cleaning the pr Cleaning the pr
Cleaning the pr Cleaning the pr Cleaning the proc
oc
oc oc ocessor
essor
essor essor essor
and attachments and attachments
and attachments and attachments
and attachments
1 Switch the processor off and unplug from the
electrical socket
2 All accessories and processor tools can be
washed in hot soapy water except for the
processor body
.
WARNING: EXTREME CARE MUST BE TAKEN
WHEN WASHING THE METAL BLADES AS
THESE ARE EXTREMELY SHARP.
3 The stainless steel blades and citrus press
are the only dishwasher safe items.
4 Clean the processor body by wiping with a
damp cloth. ALWAYS UNPLUG THE
PROCESSOR BODY BEFORE CLEANING.
5 To clean the blender fill with warm water
and washing up liquid, run for 30 seconds on
maximum speed and repeat as necessary.
Hints and tips Hints and tips
Hints and tips Hints and tips Hints and tips
•
The metal blade 23 can be used for chopping
meat, fish, vegetables, cheese etc, setting the
speed to maximum.
•
For finer chopping, increase the length of time
you process.
•
For coarser chopping, use the pulse button for
a few seconds and monitor food texture
•
Pre-cut larger pieces to make them fit into the
feed tube. When chopping hard foods (e.g.
meat, cheese) cut into 1 inch/2.5cm cubes.
•
For shredding place food horizontally into the
feed tube, for slicing place the food vertically.
•
When blending, pour the liquids in first and
then add the solid food. Begin blending at the
lower speed and increase when needed.
•
When slicing carrots, place 2 at a time in the
feeder tube to keep upright.
Blender
1 Remove the
processor bowl
and lid.
2 Remove the safety
cover
. This can
only be done once
the processor lid
has been
removed.
3 Place the blender
into its location
on the processor
body, with handle
to the left. Turn
anti-clockwise until
the blender clicks
in place and the
arrows are aligned
4 Place food in
blender
5 Place the lid
and goblet
on
the blender.
6 Replace the
processor bowl
and processor lid.
Ensure that the lid
tab has clicked into
place. The blender
will not operate if
the processor lid is
not ‘clicked’ in
place.
7 Plug in the
processor
8 Always operate the
blender with the lid
in place
9 When blending hot
liquids, remove the
goblet
.
10 Never operate the
blender with more
than 1500ml of
liquid or when
empty.
FOR SAFETY, DO
NOT FIT ANY
ATTACHMENTS
INTO THE FOOD
PROCESSOR
BOWL WHEN USING THE BLENDER.
11 TO REMOVE THE
BLENDER, YOU
MUST FIRST
UNLOCK AND
REMOVE THE
PROCESSOR
LID (A).
THEN UNLOCK
AND REMOVE THE
BLENDER (B) BY
TWISTING
CLOCKWISE.
A
B