6
WARNING: STEAM CAN SCALD. REFER TO
INSTRUCTIONS FOR USING STEAM WAND
(11)
CORRECTLY.
ENSURE THE FILTER HOLDER
(17)
IS LOCKED
INTO POSITION CORRECTLY AT A RIGHT
ANGLE TO THE MAIN UNIT AND SECURELY
LOCATED IN THE BREWING HEAD
(10)
BEFORE USE.
WHEN FROTHING MILK ENSURE THE STEAM
CONTROL
(9)
IS OFF BEFORE REMOVING THE
STEAM WAND
(11)
FROM THE MILK.
After using the Steam Wand
(11)
the boiling
chamber will be too hot to brew coffee without
burning the grinds. The water will be the correct
temperature when the white Brew Coffee Ready
Light
(3)
is illuminated.
To quickly cool the boiler for brewing coffee place
an empty cup on the Drip Tray
(12)
, press the
Coffee Dispense Button
(6)
to allow water to flow
through the boiler. When the Brew Coffee Ready
Light has illuminated the boiler is at the correct
temperature to brew coffee. Press the Coffee
Dispense Button again to stop the flow of water,
remove the cup and discard. Your Accents
Espresso is now ready to brew coffee.
Your Accents Espresso will automatically switch
off 30 minutes after brewing coffee.
After brewing coffee or frothing milk your Accents
Espresso can be manually placed in standby
mode. Press and hold the On/Standby Button
(7)
for 2 seconds. All lights on your Accents
Espresso will extinguish and the unit will enter
standby mode.
To reactivate the coffee maker, press the
On/Standby Button, to switch on the unit.
When the water in the Drip Tray is full, the Drip
Tray Full Indicator
(13)
will be visible.
1.
Remove the Drip Tray from the appliance and
empty.
2.
Clean the Grid and Drip Tray with a damp cloth
before replacing.
WARNING
Emptying The Drip Tray
Tip
Standby Mode
7
To clean, remove the wand cover and use a wet
cloth to clean the wand and cover.
8
Use a pin to clean the nozzle head and air holes
in the cover.
172002 REV1.qxp_Layout 1 25/02/2015 10:32 Page 6
