4
3
Place the Filter Holder into the Brewing Head
(10)
and turn until at a right angle to the Main
Unit to lock into position securely.
2
Place the Espresso Filter into the Filter Holder
(17)
add the coffee grinds to the mark on the side of
the Filter and tamp down, alternatively insert the
E.S.E. pod.
1
Assemble the Accents Espresso as above. Fill the
Water Tank up to the MAX line, (1.25L)
Your Accents Espresso uses ground coffee
or Easy Serving Espresso (E.S.E.) pods and
comes with three suitable Filter Holders.
The 7 g Filter
(15)
is for single shot use and
the 14g Filter
(16)
is for double shot use.
Use the E.S.E. Pod Filter
(14)
when using
E.S.E. pods - a compact coffee pod with a
paper filter covering.
7
Allow the grinds/pod to cool.
Empty the coffee
grinds/ E.S.E pod, remove the Filter from the
Holder and clean.
6
Press the Coffee Dispense Button
(6)
again to
stop the flow of coffee.
5
When the Accents Espresso is ready to brew
coffee, the Brew Ready Light
(3)
will illuminate.
Place cups on the Drip Tray and press the Coffee
Dispense Button
(6)
.
4
Plug the coffee maker into the mains supply and
press the On/Standby button to activate
(7)
. Wait
for the Red Ready Light to illuminate.
(3)
Using Your Coffee Maker
172002 REV1.qxp_Layout 1 25/02/2015 10:32 Page 4
