Moroso 74018 Скачать руководство пользователя страница 4

 
 

    

 

 Installation Instructions Cont.                                                                        Page 4 of 14            

Installation Instructions Cont.                                                                        Page 4 of 14            

 

   10. Do not operate charger if it has received a sharp blow,  

been dropped or otherwise damaged in any way; return it to

 

a qualified service source. 

11. Do not disassemble charger; Take it to a qualified service  

source when repair or service is required. Incorrect  
reassembly may result in a risk of electrical shock or fire. 

12. To reduce risk of electrical shock, unplug charger from  

          outlet before attempting any maintenance or cleaning. 
 

                        WARNING 
          RISK OF EXPLOSIVE GASES 

 
      1. WORKING IN VICINITY OF A LEAD-ACID BATTERY IS  
          DANGEROUS. BATTERIES GENERATE EXPLOSIVE GASES 
          DURING NORMAL BATTERY OPERATION. FOR THIS  
          REASON, IT IS OF THE UTMOST IMPORTANCE THAT EACH  
          TIME BEFORE USING YOUR CHARGER, YOU READ THIS 
          MANUAL AND FOLLOW THE INSTRUCTIONS EXACTLY. 
      2. To reduce risk of battery explosion, follow these directions and 
          those published by the battery manufacturer and the manuf.  
          of any equipment you intend to use in vicinity of the battery.  
          Review cautionary marking on these products and on engine. 
 

          PERSONAL PRECAUTIONS 

 

1. Someone should be within range of your voice or close enough 
    to come to your aid when you work near a lead-acid battery. 
2. Have plenty of fresh water and soap nearby in case battery  
    acid contacts skin, clothing or eyes. 
3. Wear complete eye protection and clothing protection. Avoid  

          touching eyes while working near battery. 

4. If battery acid contacts skin or clothing, wash immediately with  
    soap and water. If acid enters eyes, immediately flood eyes 

   with running cold water for at least 10 minutes and get  
   medical attention immediately. 

5. NEVER smoke or allow a spark or flame in the vicinity of  

   battery or engine. 

 

    

10. Do not operate charger if it has received a sharp blow,  

        been dropped or otherwise damaged in any way; return it to

 

        a qualified service source. 

11. Do not disassemble charger; Take it to a qualified service  

        source when repair or service is required. Incorrect  

      reassembly may result in a risk of electrical shock or fire. 
12. To reduce risk of electrical shock, unplug charger from  

         outlet before attempting any maintenance or cleaning. 
 

                        WARNING 
          RISK OF EXPLOSIVE GASES 

 

   1. WORKING IN VICINITY OF A LEAD-ACID BATTERY IS  

          DANGEROUS. BATTERIES GENERATE EXPLOSIVE GASES 
          DURING NORMAL BATTERY OPERATION. FOR THIS  
          REASON, IT IS OF THE UTMOST IMPORTANCE THAT EACH  
          TIME BEFORE USING YOUR CHARGER, YOU READ THIS 

         MANUAL AND FOLLOW THE INSTRUCTIONS EXACTLY. 

      2. To reduce risk of battery explosion, follow these directions and 

          those published by the battery manufacturer and the manuf.  
          of any equipment you intend to use in vicinity of the battery.  
          Review cautionary marking on these products and on engine. 

 

PERSONAL PRECAUTIONS 

 
1. Someone should be within range of your voice or close enough 
    to come to your aid when you work near a lead-acid battery. 
2. Have plenty of fresh water and soap nearby in case battery  
    acid contacts skin, clothing or eyes. 
3. Wear complete eye protection and clothing protection. Avoid  
    touching eyes while working near battery. 
4. If battery acid contacts skin or clothing, wash immediately with  
    soap and water. If acid enters eyes, immediately flood eyes 
    with running cold water for at least 10 minutes and get  
    medical attention immediately. 
5. NEVER smoke or allow a spark or flame in the vicinity of  
   battery or engine. 

 

Содержание 74018















Отзывы: