Installation Instructions Cont. Page 11 of 14
Installation Instructions Cont. Page 11 of 14
4.
NOTE : The length of time the charger remains in the
Yellow charging mode depends on the size and
“Sate of Charge” of the battery.
This function is controlled by the solid state circuitry of the
charger which provides the correct charge profile
automatically. This charger can be left connected to the
battery for extended periods of time safely.
SPECIAL NOTE: BATTERIES THAT HAVE A
SUSPECT CONDITION, PARTICULARLY “SULFATED
CELLS” MAY WHEN FIRST CONNECTED, GO
DIRECTLY TO THE “FLASHING YELLOW LED MODE.
THEN AFTER CURRENT FLOW BEGINS. THE YELLOW
CHARGE LED STAYS ON INDICATING THAT A NORMAL
CHARGE CYCLE IS NOW OPERATING.
Do not switch to 16v when connected to a 12v battery.
TROUBLE SHOOTING GUIDE
YELLOW CHARGE LIGHT DOES NOT SWITCH ON;
The charger will not commence charging unless properly
connected.
1. Check to ensure the charger is connected correctly – BLACK
lead to NEGATIVE (-) terminal and RED lead to POSITIVE
(+) terminal or that the Factory installed OEM (Original
Equipment Manufacturer) custom connector is properly
installed regarding the Polarity at the connectors contact
terminals or at the mating connector on the battery or
equipment.
2. Check that the clips made a good connection to the battery
posts. Twist clips or clean battery posts to ensure good
connection.
GREEN READY LIGHT DOES NOT APPEAR AFTER 18
HOURS.
4.
.
NOTE : The length of time the charger remains in the
Yellow charging mode depends on the size and
“Sate of Charge” of the battery.
This function is controlled by the solid state circuitry of the
charger which provides the correct charge profile
automatically. This charger can be left connected to the
battery for extended periods of time safely.
SPECIAL NOTE: BATTERIES THAT HAVE A
SUSPECT CONDITION, PARTICULARLY “SULFATED
CELLS” MAY WHEN FIRST CONNECTED, GO
DIRECTLY TO THE “FLASHING YELLOW LED MODE.
THEN AFTER CURRENT FLOW BEGINS. THE YELLOW
CHARGE LED STAYS ON INDICATING THAT A NORMAL
CHARGE CYCLE IS NOW OPERATING.
Do not switch to 16v when connected to a 12v battery.
TROUBLE SHOOTING GUIDE
YELLOW CHARGE LIGHT DOES NOT SWITCH ON;
The charger will not commence charging unless properly
connected.
1. Check to ensure the charger is connected correctly – BLACK
lead to NEGATIVE (-) terminal and RED lead to POSITIVE
(+) terminal or that the Factory installed OEM (Original
Equipment Manufacturer) custom connector is properly
installed regarding the Polarity at the connectors contact
terminals or at the mating connector on the battery or
equipment.
2. Check that the clips made a good connection to the battery
posts. Twist clips or clean battery posts to ensure good
connection.
GREEN READY LIGHT DOES NOT APPEAR AFTER 18
HOURS.