SECTION 5:
MAINS INPUT PANEL
THIS IS SITUATED ON THE OPPOSITE SIDE TO THE CONTROL PANEL. IT CONSISTS OF
THE MAINS INPUT SWITCH, THE RATING PLATE AND THE CROSS-FOLD AUXILIARY
SWITCH WHICH SHOULD REMAIN IN THE UP POSITION WHEN THE CROSS-FOLD IS NOT
BEING USED.
SECTION 6:
DELIVERY PANEL
SET THE DELIVERY ROLLER BY RELEASING KNOB ‘N’TO A DISTANCE FROM THE UPPER
CONVEYOR ROLLERAPPROX. 50mm (2 INCHES) LONGER THAN THE FINISHED SHEET
LENGTH.
THE GUIDE RODS SHOULD BE IN POSITION TO CATCH THE WORK AS IT COMES OFF THE
UPPER CONVEYOR. KNOB ‘P’ LOCKS THE GUIDE RODS AND ALSO ALLOWS ADJUSTMENT
FOR WIDTH.
POSITION EXTENSION FINGERS T WHEN FOLDING LARGER SIZES.
THE DELIVERY CONVEYOR HAS ITS OWN SPEED CONTROLLER WITH ON/OFF SWITCH,
SPEED CONTROL KNOB AND FUSE (SEE PAGE 20 FOR INFORMATION). ENSURE THAT THE
SWITCH IS IN ITS DOWNWARD ‘ON’ POSITION.
NOTE: THE DELIVERY CONVEYOR ONLY RUNS WHEN THE MACHINE IS RUNNING
THE POWER LEAD FOR CONTROLLER PLUGS INTO THE SOCKET LOCATED ON THE REAR
PANEL OF THE UFO.
THE DELIVERY CONVEYOR MAYBE REMOVED FROM THE UFO AFTER FIRST DISCONNECTING
THE POWER SUPPLY CABLE FROM THE SOCKET AND RAISING THE KNOBS ‘R’. TAKE THE
WEIGHT OF THE CONVEYOR AND CAREFULLY SLIDE OUT OF THE MACHINE.
ELECTRIC
DELIVERY
SOCKET
MAINS ON/OFF
12