Page 13
SYSTEM
Roller Gap Set Page.
To get to the roller gap setting page click the lower tab
Roller gaps may be in the range of 0.05mm to 1.5mm, with increments of 0.05mm
The roller gaps can be adjusted to suit the thickness of the material being folded; and the
type of fold being produced. The roller gaps may also require adjustment if cracking of the
print is noticeable. (see Fig 13.1 below).
Setting the Roller Gaps (Gap 1, Gap 2 & Gap 3)
AutoFold Pro
Operating the AutoFold Pro
Roller Gap 3
Roller Gap 1
INFEED
FIG 13.1
Roller Gap 2
K1
K2
Current gap setting
for 2nd Fold Roller
Current gap setting
for 1st Fold Roller
Recommended gap values -
based on paper thickness.
Current gap
setting for 3rd
Fold Roller
